| |
Hardware Guide for stand-alone
system
The time or date is incorrect.
|
|
To set the time, press On and 5 simultaneously,
then follow on screen instructions.
To set the
date, press ON and 6 simultaneously, then follow on
screen instructions. |
top of page
|
The handheld unit shuts off in the middle of a
questionnaire |
|
To conserve battery power, the handheld unit
shuts off after a period of non-use. Set a longer
time-out period to ensure that patients have enough time
to answer the questions.
To set the time-out
period, press ON and 7 simultaneously, then entire the
desired time-out period. We recommend setting it to the
maximum of 9 minutes |
top of page
|
I’m supposed to be able to administer several
instruments, but I see only one |
|
| To see a menu of instruments (questionnaires) on
your handheld unit, press the “On” and “Backup” buttons
simultaneously. Then choose the instrument you want to
administer. |
top of page
|
I want the instrument menu to display
automatically |
|
You can configure your handheld unit to display
the instrument menu automatically.
To toggle the
menu feature on or off, follow these steps: 1) Press the
“On” and “1” buttons simultaneously. 2) Press the “On”
and “5” buttons simultaneously. 3) Press the “7” button.
4) Press the “1” button. 5) Press the ON and 0 buttons
simultaneously to turn the unit off. 6) Turn the unit
back on.
Your menu preference should now be
changed. |
top of page
|
I don’t want to see the instrument menu every
time |
|
Follow the same steps listed above to toggle the
menu off. When the menu is off, the last instrument
selected will always start by default.
Note: You
will still be able to bring up the instrument menu by
pressing “On” and “Backup” simultaneously. |
top of page
|
I need to reprint a report |
|
Occasionally you may need to reprint a report
that failed to print properly (for example, if the
printer has a paper jam, runs out of paper, etc.).
Follow the steps below to reprint a
report.
1) With the handheld unit on the base,
press the “ON” and “2” buttons simultaneously. This will
bring up the “print manager” menu.
2) Choose
“Re-Print/Terminate Reports,” then choose “Re-print
recently printed reports.”
3) Select the ID
number for the report you want to print.*
4)
Select “quit.” Then select “return to main menu.” Then
select “return to survey.” The report should
print.
* In some cases the ID numbers may not
display correctly. If the ID numbers are not displayed,
simply choose the ID at the top of the list. This will
be the last test administered. |
top of page
|
| | |
igital Diagnostics inc |
address: 11102 Cooper Drive, Littleton, CO 80127 | phone: 800.559.9885 | email: getinfo
digitaldiagnostics.com
